The advantages of Vacuum Fume Extractor Maintenance:

Investment is small, covers a small area, has no power, and is convenient for installation.

There is no motion component inside Vacuum Fume Extractor Maintenance, which is convenient for maintenance.

Making and management are very convenient. The structure is simple and the price is cheap.

It is easy to use multiple parallel use when dealing with large air volume, and efficiency resistance is not affected.

It can resist 400 ° C and high temperature. If you use special high -temperature resistance materials, you can also tolerate higher temperatures.

After the dust collector is provided with abrasion -resistant internal lining, it can be used to purify the flue gas containing high corrosive dust.

It can be cleaned dry, which is conducive to recycling valuable dust.

Disadvantages of Vacuum Fume Extractor Maintenance:

The purification efficiency is low, which can achieve 70%purification efficiency for large particles of dust, while fine dust cannot achieve much effect.

If the ash unloading valve leaks, it will seriously affect the dust removal efficiency. Dysplasia is severe, especially for high -concentration or large -wear dust, and the entrance and cone are easy to wear.

The dust removal efficiency is not high (for the fine dust and dust with less dust and dust with less than 5um, the efficiency is very low), and sometimes it cannot meet the requirements of the dust -containing gas emissions when used alone.

Because the dust removal efficiency decreases with the diameter of the cylinder, the disposal air volume of a single dust collector is limited.

The dust collector uses the dust -containing airflow for rotation movement. With the help of centrifugal, the principle of separation of smoke and dust, combined with a series of vertical multi -pipes and cutting air intake designed by various combustion methods, thermal power burning boilers and small and medium -sized industrial kiln furnaces. Vacuum Fume Extractor Maintenance. This dust collector is combined by the air volume, so it is widely used. It is suitable for boilers of 1 to 400 tons/hour. Various types of kiln and various high dust areas air purification treatment and dust recovery Essence The dust collector is a single whirlwind formed by casting, which is assembled by a large -scale dust removal equipment. The flue gas is cut into each whirlwind evenly from the inlet of the box, and the dust is stored in the lower ash bucket with the help of the centrifugal force. The dust collector has high dust removal efficiency (94%to 97%), long service life, safe and reliable operation, without maintenance, strong applicability and other advantages to obtain users'*.

vacuum fume extractor maintenance https://www.kaisenfilter.com/KSG-5-5-A-High-Vacuum-Fume-Extractor.html